Hydrocyclone separator for Starch
Hydrocyclone separator for Starch : Hydrocyclone separators are commonly used in the starch industry for separating starch from other components of the mixture, such as proteins, fibers, and lipids. The hydrocyclone separation process for starch typically involves the following steps:
Pre-treatment: The incoming starch slurry is usually screened or filtered to remove any large particles that could clog the hydrocyclone.
Hydrocyclone separation: The slurry is fed into the hydrocyclone at a high velocity, causing it to spin rapidly. The centrifugal force created by the spinning motion causes the heavier components to move towards the outer wall of the hydrocyclone, while the lighter components move towards the center. Starch, being the heaviest component, accumulates near the outer wall and is discharged through the bottom of the hydrocyclone.
Post-treatment: The separated starch is typically washed with water to remove any residual impurities and then dewatered using a centrifuge or other dewatering equipment.
The efficiency of the hydrocyclone separation process for starch depends on several factors, such as the size and shape of the hydrocyclone, the flow rate and pressure of the slurry, and the density and size of the components being separated. Hydrocyclones are commonly used in the starch industry because they are efficient, cost-effective, and easy to maintain. They can be used in a single-stage or multi-stage configuration depending on the desired level of separation.
We have factories in Thailand. Contact us for quotation, or inquiry for modifiable filter housing solutions. We manufacture and ship to clients globally. We have an extensive product range Tell us your application and we will advise which product would fit best to support your application.
Services Offered · Product Catalogue · Get A Quote Contact Us :
Line ID : @bbsinter
Tel. 061-5906036
www.bbsteelinternationnal.blogspot.com
FACEBOOK บีบี สตีล อินเตอร์เนชั่นแนล
