Hydrocyclone sand separator Water cycle process “IWAKO”

Hydrocyclone sand separator Water cycle process “IWAKO” : Cyclone separators can also be used in water cycle processes to remove sand, silt, and other suspended solids from wastewater or other water sources. The process typically involves using hydrocyclones as a pre-treatment step before further treatment or discharge of the water.

In a typical water cycle process, wastewater or other water sources enter a treatment facility or plant where they undergo various treatment steps such as screening, sedimentation, biological treatment, and chemical treatment. Before entering these treatment steps, the water may pass through a hydrocyclone sand separator to remove larger suspended solids such as sand and grit.

The water is pumped into the hydrocyclone and forced to rotate around the inside of the device. The centrifugal force created by the rotation causes the heavier solids to be pushed towards the outer wall of the device, where they collect and settle out.

The clean water is forced to the center of the device and exits through an outlet, while the separated solids are collected in a separate chamber and disposed of or further treated.

The use of hydrocyclone sand separators in the water cycle process can help to reduce the potential for clogging and fouling of downstream equipment and improve the efficiency and effectiveness of the overall water treatment process. Additionally, it can also help to reduce the wear and tear on equipment such as pumps and piping by removing abrasive solids from the water before they reach downstream equipment.

We Can Produce Suitable Hydrocyclone According to Client’s Demand or Working Condition. Need a Quote or More Information?

Line ID : @bbsinter

Tel. 061-5906036

E mail. : bbssale1@gmail.com

www.bbsinter.com

www.กระจกทนความร้อน.com

www.bbsteelinternationnal.blogspot.com

FACEBOOK บีบี สตีล อินเตอร์เนชั่นแนล