Basket strainer Process for Bottling water

Basket strainer Process for Bottling water : Basket strainers is a common process used in bottling water to remove any impurities or debris from the water before it is packaged.

The process typically involves the following steps:

-Filling the water into a holding tank: The water is pumped into a large holding tank where it is stored until it is ready to be processed.

-Pre-filtration: The water is typically filtered using a coarse screen to remove any large debris such as leaves, sticks, or other large particles.

-Basket strainers: The water is then passed through a basket strainer, which is a cylindrical screen with fine mesh that traps any remaining impurities or debris. The basket strainer is usually made of stainless steel or plastic and can have a mesh size of anywhere from 100 to 400 microns.

-Final filtration: The water is then passed through one or more additional filtration steps, such as activated carbon or reverse osmosis, to further purify the water and remove any residual impurities.

-Bottling: Finally, the purified water is packaged into bottles or containers for distribution and sale.

It is important to note that the specific steps in the basket straining process can vary depending on the water source, the desired level of purity, and the equipment being used. However, the overall goal is always to remove any impurities from the water so that it is safe and clean for consumption.

We have factories in Thailand. Contact us for quotation, or inquiry for modifiable filter housing solutions. We manufacture and ship to clients globally. We have an extensive product range like Strainer filter elements filter housings and modules to large system installations. Tell us your application and we will advise which product would fit best to support your application.

Line ID : @bbsinter

Tel. 061-5906036

E mail. : bbssale1@gmail.com

www.bbsinter.com

www.กระจกทนความร้อน.com

www.bbsteelinternationnal.blogspot.com

FACEBOOK บีบี สตีล อินเตอร์เนชั่นแนล